Life Fitness Treadmill - Manual (Page 19)

The Life Fitness Treadmill is equipped with a manual emergency stop system. Use either of the
two features described below to stop the treadmill immediately.
An octagon-shaped STOP button is located on a panel below the display console. A cord with a
clip is attached to this button. Before starting a workout, attach the clip to clothing. To stop the
striding belt on the treadmill, pull the cord, removing the key from the console. Replace the key
to reset the system.
A rectangular STOP key is located on the panel as well. Press the key to stop the striding belt
and end the current workout.
2.3 R
EADING
R
ACK
The display console design includes a built-in reading rack allowing a book or magazine to be
supported during the workout.
2.4 A
CCESSORY
T
RAYS
The accessory trays, located on either side of the display console, are removable. They should
be cleaned periodically. See Chapter 6, titled Service and Technical Data, for details.
19