Linksys WPS54GU2 - Manual (Page 63)

56 Appendix D: Upgrading Firmware
Wireless-G PrintServer for USB 2.0
Appendix D: Upgrading Firmware
The PrintServer’s firmware is upgraded through the Bi-Admin Management utility. Follow these instructions:
1. Download the firmware from Linksys’s website at www.linksys.com.
2. Open the Bi-Admin Management utility.
3. Click Main => Upgrade Firmware.
4. Click the Files... button to browse for the file.
5. The Detected LAN Cards screen will appear, as shown in Figure C-2. Select the LAN card the PrintServer is
connected to, and then click the OK button. Select the firmware file you want to use.
6. View the BIN File Information screen, and click the OK button if you have selected the correct firmware file.
Click the Cancel button to select a different firmware file.
7. On the Upgrade screen, click the Upgrade button. Click the Cancel button to cancel the firmware upgrade.
For more information, click the Help button.
Figure D-1: Upgrade Firmware
Figure D-2: Detected LAN Cards
Figure D-3: BIN File Information