LG VIDEOSECU SAC30708022 - Manual (Page 98)

APPENDIX
96
Command Reference List
APPENDIX
C CO OM MM MA AN ND D1 1 C CO OM MM MA AN ND D2 2
19. Channel Tuning
DATA
(Hexadecimal)
C CO OM MM MA AN ND D1 1 C CO OM MM MA AN ND D2 2
DATA
(Hexadecimal)
C CO OM MM MA AN ND D1 1 C CO OM MM MA AN ND D2 2
DATA00
(Hexadecimal)
DATA01
(Hexadecimal)
DATA02
(Hexadecimal)
DATA03
(Hexadecimal)
DATA04
(Hexadecimal)
DATA05
(Hexadecimal)
physical major major low minor high minor low attribute
program high program low
m a
01. Power k a 00 ~ 01
02. Input Select x b ( G G p.97)
03. Aspect Ratio k c ( G G p.97)
04. Screen Mute k d 00 ~ 01
05. Volume Mute k e 00 ~ 01
06. Volume Control k f 00 ~ 64
07. Contrast k g 00 ~ 64
08. Brightness k h 00 ~ 64
09. Color k i 00 ~ 64
10. Tint k j 00 ~ 64
11. Sharpness k k 00 ~ 64
12. OSD Select k l 00 ~ 01
13. Remote Control
Lock Mode
Transmission / Receiving Protocol
T Trraannssm miissssiio onn
[Command 1] : First command to control the set. (j, k, m or x)
[Command 2] : Second command to control the set.
[Set ID] : You can adjust the set ID to choose desired TV ID
number in Setup menu. Adjustment range is 1 ~ 99.
When selecting Set ID ‘0’, every connected the TV is
controlled. Set ID is indicated as decimal (1
~ 99) on
menu and as Hexa decimal (0x0 ~ 0x63) on transmission
/receiving protocol.
[DATA] : To transmit the command data.
Transmit the ‘FF’ data to read status of command.
[Cr] : Carriage Return
ASCII code ‘0x0D’
[ ] : ASCII code ‘space (0x20)’
* In this model, TV will not send the status during the standby mode.
O OK K A Acckknno ow wlleed dggeem meenntt
The TV transmits ACK (acknowledgement) based on this for-
mat when receiving normal data. At this time, if the data is
data read mode, it indicates present status data. If the data is
data write mode, it returns the data of the PC computer.
* In this model, TV will not send the status during the standby mode.
* Data Format
[Command 2] : Use as command.
[Set ID] : Use the small character, if set ID is 10, it will send the ‘0’, ‘a’.
[DATA] : Use the small character, if data is 0 x ab, it will send the ‘a’, ‘b’.
[OK] : Use the large character.
EErrrro orr A Acckknno ow wlleed dggeem meenntt
The TV transmits ACK (acknowledgement) based on this for-
mat when receiving abnormal data from non-viable functions
or communication errors.
Data1: Illegal Code
Data2: Not supported function
Data3: Wait more time
* In this model, TV will not send the status during the standby mode.
* Data Format
[Command 2] : Use as command.
[Set ID] : Use the small character, if set ID is 10, it will send the ‘0’, ‘a’.
[DATA] : Use the small character, if data is 0 x ab, it will send the ‘a’, ‘b’.
[NG] : Use the large character
[[C Coom mm maanndd1 1]][[C Coom mm maanndd2 2]][[ ]][[SSeett IID D]][[ ]][[D Daattaa]][[C Crr]]
[[C Coom mm maanndd2 2]][[ ]][[SSeett IID D]][[ ]][[O OKK]][[D Daattaa]][[xx]]
[[C Coom mm maanndd2 2]][[ ]][[SSeett IID D]][[ ]][[N NG G]][[D Daattaa]][[xx]]
14. Treble k r 00 ~ 64
15. Bass k s 00 ~ 64
16. Balance k t 00 ~ 64
17. Color Temperature k u 00 ~ 02
18. Auto Configuration j u ( G G p.98)
20. Channel Add/Del m b 00 ~ 01
21. Key m c ( G G p.99)
22. Backlight m g 00 ~ 64
00 ~ 01 k m