La Crosse Technology WS-7078UF - Manual (Page 9)

9
Note: There are more time zones represented by numbers than
there are represented by 3 letter abbreviations. If you live in
North America you need only be concerned with the ones in the
chart above.
5. Press and release the “SET” button to confirm your selection
and advance to the Daylight Saving Time setting.
C. Daylight Saving Time(DST) Setting
1. Press and hold the “SET” button for 3 seconds or until “12h”
or “24h” flashes in the DATE LCD.
2. Press and release the “SET” button 2 times to reach the DST
selection mode.
3. “DST 1” is the default (factory) setting and will be flashing in
the DATE LCD.
4. Press and release the “CH” button to select “DST 0” or “DST
1.”
“DST 0” indicates that the feature is off and the indoor weather
station will not change times at the daylight saving time changes
automatically. “DST 1” indicates that the feature is on and the
indoor weather station will change times at the daylight saving
time changes automatically.
Note: Some locations (Arizona and parts of Indiana) do not
follow Daylight Saving Time, and should select “DST 0.”
5. Press and release the “SET” button to confirm your selection
and advance to the Time setting mode.