La Crosse Technology WA-1240U - Manual (Page 11)

Version 1.0 - 9/26/2008
Page 11 of 31
Display.
The Daylight Saving Time (DST) checkbox on your Wireless Display settings at
www.weatherdirect.com is selected by default because most locations observe
DST. If you are in a location that does not observe DST, please make sure to
uncheck this box.
Wireless Outdoor Sensor
The Wireless Outdoor Sensor sends temperature data to your Wireless Display,
accurate to within a tenth of one degree.
The Outdoor Temperature Sensor uses 2 x “AA”,
Alkaline batteries. To install and replace the
batteries, please follow the steps below:
1. Remove the battery compartment cover on
the back of the sensor.
2. Insert the batteries, observing the correct
polarity (see marking).
3. Replace the battery compartment cover on
the unit.
Press the “SNOOZE” Key on your Wireless Display to show the outdoor
temperature at any time. The outdoor temperature will scroll on the bottom of the
LCD.
Edit Device Settings Online
This section will show you how to set up your Wireless Display using your
account at
www.weatherdirect.com .
• Log In to your profile on
www.weatherdirect.com and click on your
WA-1240U Wireless Display under the “My Devices” banner