La Crosse Technology WS-7168U - Manual (Page 23)

23
greater range of the remote temperature sensor requires a different
calibration curve than the indoor range. Error is usually greater at the
extreme ends of a range, making it harder to compare different ranges with
different curves. Under non-laboratory conditions, it is difficult to
compensate for the above factors and obtain an accurate comparison.
MAINTENANCE AND CARE INSTRUCTIONS
• Extreme temperatures, vibration, and shock should be avoided to prevent
damage to the units.
• Clean displays and units with a soft, damp cloth. Do not use solvents or
scouring agents; they may mark the displays and casings.
• Do not submerge in water.
• Immediately remove all low powered batteries to avoid leakage and
damage.
• Opening the casings invalidates the warranty. Do not try to repair the unit.
Contact La Crosse Technology for repairs.
SPECIFICATIONS
Temperature measuring range:
Indoor:
14.2
°F to 139.8°F with 0.1°F
resolution. (-9.9
°C to 59.9°C
with 0.1
°C resolution). “OFL”
displayed if outside this range.
Outdoor: -21.8
°F to 157.8°F with 0.1°F
resolution. (-29.9
°C to 69.9°C
with 0.1
°C resolution). “OFL”
displayed if outside this range.
Indoor relative humidity
measuring range:
1% to 99% with 1% resolution.
(“- -” displayed if outside this
range.
Indoor temperature checking
interval: Every 10 seconds.
Indoor Humidity checking
interval: Every 1 minute.
Outdoor temperature checking
interval (remote temperature Every 1 minute.