La Crosse Technology WS-7168U - Manual (Page 21)

21
A. USING THE TABLE STAND
The indoor weather station comes with the table stand
already mounted. If you wish to use the table-stand all
that is required is to place the indoor weather station in
an appropriate location.
B. WALL MOUNTING
1) Remove the table-stand. To do this, pull down on the
stand from the rear and rotate forward.
2) Fix a screw (not included) into the desired wall,
leaving approximately 3/16 of an inch (5mm)
extended from the wall.
3) Place the indoor weather station onto the screw using
the hanging hole on the backside.
4) Gently pull the indoor weather station down to lock the
screw into place.