La Crosse Technology WS-7054U - Manual (Page 21)

18
a) Remove the table stand. To
do this, pull down on the
stand from the rear and rotate
forward.
b) Fix a screw (not included)
into the desired wall, leaving
approximately 3/16 of an inch
(5mm) extended from the
wall.
c) Place the Indoor Temperature
Station onto the screw using
the hanging hole on the
backside. Gently pull the
Station down to lock the
screw into place.
VIII. USING MULTIPLE REMOTE
CONTROL SENDERS
Your WS-7054U Indoor Temperature Station
can receive signals from five different Remote
Control Senders (The TX3U features
temperature data transmission and the TX3UP