La Crosse Technology WS-7054U - Manual (Page 18)

15
c) Where marked, drill holes
into mounting surface using
an appropriate size drill bit.
d) Screw mounting bracket onto
the mounting surface. Ensure
that the screws are flush with
the bracket.
2. MOUNTING WITH
ADHESIVE TAPE
a) With a nonabrasive solution,
clean and dry the back of the
mounting bracket and the
mounting surface to ensure a
secure hold. The mounting
surface should be smooth and
flat.
b) Remove the protective strip
from one side of the tape.
Adhere the tape to the
designated area on the back of
the mounting bracket.