Lantronix UDS100 - Manual (Page 20)

Configuring the UDS Using Web Manager UDS10/UDS100 User Guide
20
Using Web Manager
1. To configure the unit, select UDS Settings on the UDS Configuration Guidelines
Page. The Web Manager page displays.
Figure 4-3. Lantronix Web Manager
2. Use the menu (pushbuttons) to navigate to sub pages where you can configure
server settings.
Note: For detailed explanations of the settings, see 5: Configuring
the UDS Using Telnet or the Serial Port.
3. When you are finished, click the Update Settings button to save your settings.
Example
For example, to enter server properties:
1. Click the Server Properties button. The Server Properties section of the Web
page displays.
2. Confirm or enter values for
‹ IP Address
‹ Subnet Mask
‹ Gateway Address