Logitech NuLOOQ - Manual (Page 38)

Triggerpoint III is set to
Step Forward (SHIFT
+CTRL+Z).
Triggerpoint "Square" at 12
o'clock position is set to
enable static value
adjustment mode to make
adjustments to brush size.
Triggerpoint "Circle" at 6
o'clock position is set to
CTRL key. Press the key to
emulate CTRL key.
Usage Recommendations
1. The key here is configuring for your needs. Quickly access your frequented tools or menu
commands or whatever you need onto the buttons. This way a quick click of the triggerpoint and
you can continue working without the interruption of using the mouse or your keyboard.
Click
here to see how you can configure your triggerpoints.
2. Use the middle triggerpoint, triggerpoint II for your most frequently used command or modifier
key. This light touch triggerpoint is easy on the finger and is optimum for repeated high