Lathem 7500E - Manual (Page 40)

22
37 36
Card reassign
When the card that you are using becomes full (Max 64 punches), it will show "End" on the
display and the buzzer will sound. When the "End" appears, you can use the "Card reassign"
mode to transfer the card and have a new card take over from the old one.
In this function, it will be useful:
• when the card has become full before reaching the "Pay Period". [In Payroll Mode]
• when the card that is lost or damaged.
You can transfer the old card to a new one with the same number or the one which is not
used in the current pay period. If you are already using all time cards from No. 1 to 100,
you can transfer the card only to the new one with the same card number. If you prefer to
use another time card with a different number, you must reset the corresponding card first.
CHANGE
Example
2
Push the CHANGE button for 5
seconds.
When you have a card that you are
using, the number of cards that you
are using will be shown on the
display. If there are no cards used
at the present state, it will show
"n000" and will end the mode.
003
Card of No.3
017
Card of No.17
transfer
The number
of cards
1
Remove the cover. Cover