Lathem 7500E - Manual (Page 15)

13
12 11
3
In the example, push the SET button
because the year 2009 is not to be
changed. Now the year of 2009 has
been set.
At that moment, the flashing of the
display will change from "Year" to
"Month".
4
In the example, push the SET button
because the month of October is not
to be changed. Now October has
been set.
At that moment, the flashing of the
display will change from "Month"
to "Date".
5
Change "Date" (for example, from
20 to 21)
Push the CHANGE button to set
"Date" at "21" and then push the
SET button, and now the date of 21
has been set.
At that moment, "Date" on the
display will change from flashing to
steady, and the date change setting
is now completed.
Setting the Date
DATE
DATE
DATE
DATE
CHANGE SET
CHANGE SET
CHANGE SET
Example: Change the date from October 20, 2009 to October 21, 2009.
Year Month
Date
1
Push the DATE/TIME button for 5
seconds.
2
A flashing number means that it
can be changed.
DATE/TIME
CHANGE SET DATE/TIME
DATE/TIME
DATE/TIME
6
Push the SET button once again.
Push the DATE/TIME button twice
to position the " " under the "DATE"
mark.
You have completed this setting. Go to the next setting listing in
"Default Settings" on page 7 to continue with the setup.