Lathem 7500E - Manual (Page 19)

22
13 16
You have completed this setting. Go to the next setting listing in
"Default Settings" on page 7 to continue with the setup.
Setting Bi-Weekly Period in Payroll Mode
1
Example: Change to Bi-Weekly Period and set the desired starting date of the pay period
to October 19.
SET FUNCTION CHANGE
MODE
Push the FUNCTION button for 5 seconds
and make sure the " " is positioned under
the “MODE” mark.
2
Set the "Mode".
SET FUNCTION CHANGE
MODE
Bi-Weekly
period
SET FUNCTION CHANGE
MODE
3
4
5
Push the SET button once again.
Set the "Starting date".
Month
SET FUNCTION CHANGE
MODE
Date
In the case of Bi-Weekly period, push the
CHANGE button to set the left-side number
at "3" and then push the SET button. At that
moment, the flashing of the display will
change to the middle number.
You must enter the starting date of the
current pay period. For example, if the
current date is Wednesday, Oct. 17, and you
want the next Bi-Weekly period to start
Monday, Oct. 22, enter Monday, Oct. 8 for
the starting date.
Now the first day of default pay period is
shown. To set pay period, you have to input
a starting date. In the example, push the SET
button because the month of October is not
to be changed. At that moment, the flashing
of the display will change from "Month" to
"Date".
Change "Date" (for example, from 12 to 19).
Push the CHANGE button to set "Date" at
"19" and then push the SET button, and now
the date of 19 has been set.