Lightwave Communications SCS3230 - Manual (Page 86)

ConsoleServer 3200 System Lightwave Communications
Rev. A - 86 - www.lightwavecom.com
the bottom of the buffer is indicated as BOTTOM>, and any other position is indicated as a
percentage of the total buffer (e.g., 51%>).
Connecting...
W.O.P.R.
LOGIN:GUEST
PASSWORD:*****
LOGIN FAILED
LOGIN:SFALKEN
PASSWORD:********
LOGIN FAILED
LOGIN:JOSHUA
Greetings Professor Falken
How are you today? Shall we play a game?
>
TOP>usr1-DEVICE_1>
The following table outlines the functions of the individual commands and pull down
menu items.
COMMAND MENU ITEM FUNCTION
TOP GOTO BEGINNING OF BUFFER displays first 24 lines of
buffer data
BOTTOM GOTO END OF BUFFER displays last 24 lines of
buffer data
NEXT DISPLAY NEXT PAGE displays next 24 lines of
buffer data
PREVIOUS DISPLAY PREVIOUS PAGE displays previous 24 lines
of buffer data
FORWARD FORWARD N LINES skip forward N lines in
buffer
REVERSE
REVERSE N LINES skip back N lines in buffer
The commands
FORWARD and REVERSE must be followed by the number of lines the user wants
to move in the buffer. The command will not execute if the number of lines is omitted.
The user may also clear the buffer by using the command
CLEAR or by selecting CLEAR
BUFFER from the pull-down menu. All data stored in the device buffer will be erased and is not
recoverable. The sys admin may inhibit this ability on a per-user basis by either creating the
user ID without this ability or editing the user parameters after the user is created.