Linksys Dual Gigabit with 24-Port 10/100 Switch EF24G2 - Manual (Page 4)

EtherFast ® Dual Gigabit with 24-Port 10/100 Switch
3
Getting to Know the Switch
Power (Green) The LED will illuminate when the switch is
powered on.
PER PORT
Link/Act (Green/Amber) The LED will illuminate green when the
port makes a connection at 100Mbps, and flash green when
there is activity on the port at 100Mbps. The LED will
illuminate amber when the port makes a connection at
10Mbps, and flash amber when there is activity on the port at
10Mbps.
FD/Col (Amber) The LED will illuminate amber when the port is
operating in full-duplex mode, and flicker amber when
collisions are being encountered.
GIGABIT PER PORT (G1/G2)
1000Link (Green) The LED will illuminate when the Gigabit Port
is successfully connected to a network.
FD/Col (Amber) The LED will illuminate amber when the port is
operating in full-duplex mode, and flicker amber when
collisions are being encountered.
Rx (Green) The LED will illuminate when the Gigabit Port is
receiving data.
Tx (Green) The LED will illuminate when the Gigabit Port is
transmitting data.
Instant Gigabit ® Series
• One EtherFast ® Dual Gigabit with 24-Port 10/100 Switch
• One Power Cord
• Mounting Brackets (not shown)
• One Serial/Console Cable (not shown)
• User Guide and Registration Card
2
LEDs
Package Contents