Chapter14 upgrade new firmware – LevelOne FPS-3003 User Manual

Page 69

Text mode
Original mode

Chapter14 Upgrade New Firmware

This chapter describes how to upgrade your new firmware. You can
use the following Procedures to upgrade new firmware

Procedure A: Using PC User Software

1. Open the FPS-3003 MFP Control Center. It will automatically

search the existing servers and display their status.

2. Select the server that you want to upgrade the firmware.

Double click the selected server and enter Administrator Name
and Password. Please note that the default values of
Administrator and Password are admin.

3. Select the Maintenance button.

4. Click Open your new firmware file and click Upgrade.
5. Wait about 15 seconds for system reboot.

Procedure B: Using Server’s Web Pages

1. Power on FPS-3003. Suppose FPS-3003 is in DHCP mode.
2. Check FPS-3003's IP address.
3. First, run FPS-3003 control center. The control center will