LevelOne FPS-3003 - Manual (Page 5)

5
Chapter1 Introduction
Thank you for purchasing the FPS-3003 USB MFP server. This product
is designed to connect your printers, USB Mass Storage/Memory Card
Reader, and scanners of HP Office Jet series all-in-one printers (MFP),
anywhere in your network, allowing all network users access to
shared USB devices resources.
1.1 About this Manual
This manual provides introductory information as well as detailed
instructions on how to set up and manage the print server in various
network environments. To fully benefit from this manual, you should
be familiar with basic networking principles.
These instructions are based on the settings in a new MFP server. To
reload the Factory Parameters, you can perform a Factory Default,
which will restore most of the settings. See “Factory Default” on page.
1.2 Support Services
Should you require any technical assistance, please contact your
product reseller. Or you can visit our website at
http://www.level1.com for latest product information.
This manual is subject to changed without notice.