LevelOne FPS-3003 - Manual (Page 15)

15
6. Click Submit to save your settings. And the server will reboot.
You have now finished the procedure of setting the IP address.
3.3 Naming Your USB Devices
3.3.1 Printer Names
Default Printer Name
1. The system will set the printer model names as the default
printer names. The system only allows a 12 characters
long USB device name. For example, the printer model
name is “psc 1300 series” and then the default printer
name will be set as “psc 1300 ser”.
2. If system can not get the printer model (For ex, you use
some parallel printers and use Parallel-to-USB cables to
connect the printers), the default printer names are set as:
USB1_Printer and USB2_Printer with respect to USB1 port
and USB2 port.
Set Printer Name
You can set yourself printer names by LevelOne MFP Control
Center or server’s web pages.
i. Using LevelOne MFP Control Center
1. Start LevelOne MFP Control Center and Auto-searching
MFP server window will appear.
2. If the tool finds MFP servers in your local area network,