La Crosse Technology WS-7016U User Manual
La Crosse Technology Recorders

1
WS-7016U
Wireless 433 MHz
Temperature Station
Instruction Manual
2
TABLE OF CONTENTS
Topic Page
Inventory of Contents
1
Additional Equipment
1
Quick Setup
2
Detailed Setup Guide
Battery
Installation
3-6
Remote Control Sender
3-4
Indoor Temperature Station
5-6
Setting
the
Time
7-8
Selecting Units of Measurement
8
Features
Indoor Minimum and Maximum
Temperatures
9
Outdoor
Minimum
and
Maximum
Temperatures
10-11
Resetting the Indoor Minimum
and Maximum Temperatures
11-12
Resetting the Outdoor Minimum
and Maximum Temperatures
12
Reading the Temperature Trend
13
Mounting
3
Remote Control Sender
13-16
Indoor Temperature Station
16-18
Using Multiple Remote Control Senders
Setup of Multiple Units
18-21
Viewing
Remote
Control
Senders
21-22
Features of the Multiple Remote
Control
Senders
22-23
Troubleshooting
24-28
Maintenance and Care Instructions
28-29
Specifications
29-31
Warranty Information
31-33
FCC DISCLAIMER
34
INVENTORY OF CONTENTS
1. The Indoor Temperature Station (Figure 1)
2. The Outdoor Remote Control Sensor
(TX3U) and mounting bracket. (Figure 2)
3. 3 each, 1/2” Philips screws.
4. One strip of double sided adhesive tape.
4
5. Instruction Manual and Warranty Card.
ADDITIONAL EQUIPMENT (not included)
1. 1 Philips screwdriver.
2. 1 Flat screwdriver.
3. 2 Fresh AA 1.5V batteries.
4. 2 Fresh AAA 1.5V batteries.
QUICK SETUP
1. Insert two AAA batteries into the Remote
Control Sender.
2. Insert two AA batteries into the Indoor
Temperature Station.
Figure 1
Figure 2