Lennox Hearth Montage 32FS - Manual (Page 26)

NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE
6
Flue Size 3” (76 mm) Rear
Floor Protection Front and Sides: 6”(15 mm)
Requirements Back: Up to 6”(15 mm) u
Hopper Capacity 55 Lbs. v
Burn time 15 - 37 hours v
Fuse, Control Board 5 Amp, 50 volt, 3AG w
Fuse, Igniter 6 Amp, 15 volt w
Heat Input 13,000 - 3,000 BTU/hr v
(BTU’s per hour)
Emissions < 4.5 gr/hr (varies w/size and
type of fuel) EPA Certified v
Convection (room air)
Blower
150 CFM; 1.5 Amps,
175 rpm
Combustion Blower 95 CFM: 1.0 Amps,
3000 rpm
Auger Motor 1.5 RPM; 0.5 Amps
Standard Features Fastfire™ Self Igniter
Wall Thermostat
(wire included)
SPECIFICATIONS - Montage™ 3FS
Notes:
• Dimensions shown are approximations only
.25 (+/- 1/4”)
• Approved for Manufactured Home Installations.
• Optional Kits Available - Decorative trim kits, log
set, window screen and 4” Quick Disconnect
kits.
• The burn grate is designed with advanced
UltraGrate™ technology.
u Non-combustible floor protection is required
(see Floor Protection, Page 4). When installed
at clearances less than 6”, the floor protector is
only required to extend to the wall.
v Fuel delivery and burn times will vary depending
on size and type of fuel used. Estimated heat input
based on fuel value of 8400 BTU per lb.
w Fuses are rated as fast blow.
Product Reference Information
Cat. No. Model Ship.
Weight
Ship.
Volume
H6839 Montage 3FS 85 lb. .06 cu. ft.
9-5/8”
245mm
28-11/16”
729mm
9-3/16”
233mm
24-11/16”
627mm
1-9/16”
40mm
11-1/4”
286mm
23-1/8”
507mm
2-15/16”
75mm
5-1/2”
140mm
11-1/4”
286mm
7”
178mm
22-1/2”
572mm
2”
51mm
Stove Back
Clean-Out
Tee
5-7/8"