Liebherr WF1051 - Manual (Page 16)

A delight in freshness
WF1051 / EWTNes 2956 14
I
NSTALLATION
Turn clockwise for up and counterclock-wise
for down. For the rear use the adjusting
bolt (2). Turn clockwise for down and counter-
clockwise for up.
Maximum adjustment: 19/64" (15 mm).
3. Figure 18: Align the appliance at the side
with the cabinet side panel and attach it with
screws (1).
- Cover the screws with cover caps (2).
4. Fit the ventilation grille at the bottom [(3) if
the door is hinged on the left, (4) if it is on the
right]: Secure the ventilation grille so that it
touches the floor and then adjust it using the
slots.
Figure 18
Figure 17
1. Carefully slide the appliance into the cabinet
until the ventilation grille touches the surrounding
kitchen cabinet.
2. Align the appliance until it is parallel with the sur-
rounding kitchen cabinet. Use the open- end
wrench 10 mm (3) to adjust the feet at the front.
- Figure 17: Connect the appliance to the
main power supply.
- If the appliance is equipped with an
IceMaker, establish the connection for
the water supply. See “IceMaker, Water
Connection”.
1. 2.
1
2 2
3
3
3
10 spanner
8 spanner
2
2
3
5
5 5
5
1
4
3.
4.