Liebherr WF1051 - Manual (Page 11)

A delight in freshness
WF1051 / EWTNes 2956 9
R
EVERSING
D
OOR
H
INGES
The door hinges can be changed
from one side to the other if
required.
1. Figure 4: Top: Unscrew the
hinge pin (2) and remove the
screw (5).
2. Swivel out the door at the
top, ensuring that you do not
lose the stop (7) and bushing
(8); lift off the door and place
it on the floor. Unscrew the
handle from the upper door
and pull out the cover caps (A). Then screw
the handle on the opposite side of the
upper door and place the plugs (Y) in the
open screw holes.
3. Center: Pull out the hinge pin (9) with its
washer.
4. Swivel out the lower door, lift it out and
place it on the floor. Take care not to lose
the stop (7) and washers (8). Unscrew the
handle from the lower door and pull out the
plugs (A). Then screw the handle on the
opposite side of the lower door and place
the plugs (Y) in the open screw holes.
5. Unscrew all the door fittings (14, 17) and
remove plugs (W, X).
14
A
A
Y
X
W
W
X
Y
17
8
7
2
5
8
7
9
2.
2.
5.
5.
4.
4.
3.
1.
Fig.A BGENes
Figure 4