Stand instruction, Preparation, Installation – LG SAC34026004 User Manual
Page 14
PREP
AR
A
TION
12
STAND INSTRUCTION
PREPARATION
■
Image shown may differ from your TV.
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
Assemble the TV as shown.
1
2
3
INSTALLATION
G
G
When assembling the desk type stand, make sure the bolt is fully tightened (If not tightened fully, the TV can
tilt forward after the product installation). Do not over tighten.
G
G
When assembling the stand as in figure 2 above, you can hear some disturbing noise which is by the cable
management disturbing the stand. Please ignore the noise and try again assembling the stand after setting the
cable management in the right position.
NOTE
!
x 4
Tighten the stand with the four screws (provided as
parts of the TV).
or
Tighten the two of these four screws
and the two Torx plus star head
screws (provided as parts of the TV) to secure the
TV. Tighten the two Torx plus star head screws with
a star head driver bit (not provided as parts of the
TV).
x 2
x 2