Lindy 32351 User Manual
Page 35
LINDY CPU Switch Dual Junior Installation and Use
Page 34
working on the computer until they came back. Consequently the system
administrator can disable all exclusive use so that all connections are shared.
3.6.6 AUTOMATIC LOGOUT
Accessed from menu: SETUP OPTIONS
Settings: DISABLED, ENABLED
The LINDY CPU Switch enables you to restrict access to your computers on a login
basis. If a user forgets to logout when they have finished accessing the LINDY CPU
Switch then the user console may unintentionally be left with full access to all the
computers. The LINDY CPU Switch may be set to automatically logout unattended
user consoles when the screen saver kicks in. This reduces the risk of security
problems by preventing user consoles remaining in a permanent “logged-in” state
when there is no keyboard or mouse activity. The automatic logout feature is only
enabled when the screen saver feature is active (i.e. not disabled).
3.6.7 MOUSE SWITCHING
Accessed from menu: GLOBAL PREFERENCES
Settings: ENABLED, DISABLED
Like most LINDY KVM switches, the LINDY CPU Switch Dual Junior's channel may
be switched using a three button mouse or IntelliMouse (see section 4.9). Pressing
the central button or wheel button together with the left hand mouse button will
cause the LINDY CPU Switch to switch to the next available computer. When mouse
switching is enabled the central mouse button or wheel mouse button is allocated to
control the LINDY CPU Switch and is not therefore available for use by computer
applications. If you want to use the central mouse button within your applications
you will need to disable mouse switching. The rotation action of an IntelliMouse
wheel is not affected and is always available to the computer application.
3.6.8 SCREEN SAVER
Accessed from menu: GLOBAL PREFERENCES
Settings: DISABLED; 2, 5, 7, 10,15, 20 & 30 MINUTES
To avoid burning out the phosphor on CRT monitor screens, the LINDY CPU Switch
can be set to blank the screen after no keyboard or mouse activity has been
detected for a selected timeout period. If preferred, the user can blank the screen