Lindy 32351 - Manual (Page 24)

LINDY CPU Switch Dual Junior Installation and Use Page 23
Type of mouse / system Driver type Likely expected Suggested
Connected at bootup data format restoration
PS/2 PS/2 only PS/2 Standard
PS/2 IntelliMouse PS/2 Standard
IntelliMouse / CPU Switch PS/2 only PS/2 Standard
IntelliMouse / CPU Switch IntelliMouse IntelliMouse IntelliMouse
To restore lost mouse movement on a CPU connected to the LINDY CPU Switch:
1) Select the CPU that has lost its mouse movement
2) Activate the on-screen menu using the keyboard hotkeys
3) Press F1 to view additional menus
4) Select the FUNCTIONS menu
5) Select RESTORE STANDARD MOUSE or RESTORE INTELLIMOUSE
6) Exit the on-screen menu
2.10 Connecting a LINDY extender
You may connect external LINDY extenders (i.e. a receiver / transmitter pair) to the
LINDY CPU Switch's KVM connectors. If you do this then you should power the
LINDY extender using their optional power adapter.
LINDY extender requirements
Your LINDY extender unit will need to be fitted with firmware version 1.08 or higher if
it is a Pro Extender model or 2.08 or higher if it is a Junior model. If you have an
earlier LINDY extender unit please contact LINDY technical support for advice.