Lenoxx Electronics PH-3235 User Manual
Page 9
IB-PH3235(MS)-WM-E-122203
SPEAKERPHONE & HEADSET
HANDS-FREE TELEPHONE OPERATION
MAKING CALLS WITH SPEAKERPHONE
1. Select the desired dialing mode with the TONE / PULSE switch (do this only the first
time after installation).
2. Press SPEAKERPHONE (HEADSET) to get dial tone - no need to lift the HANDSET.
3. Adjust the VOLUME control on the right side of the phone.
4. Dial your call.
5. To hang up, press the SPEAKERPHONE (HEADSET) button again.
NOTE 1: Be sure to notify the other party that you are using the speakerphone mode, the
other party may not wish anyone else to hear the conversation.
NOTE 2: Adjust the VOLUME of the SPEAKERPHONE to the desired sound level while the
other party is talking. If a squealing or whistling sound is heard, reduce the
speakerphone volume setting.
ANSWERING CALLS WITH HEADSET
1. Insert the HEADSET plug into the HEADSET jack on the right side of the phone as
described on the previous page.
2. When the phone rings, press the SPEAKERPHONE (HEADSET) button.
3. Adjust the VOLUME control on the right side of the phone.
4. When you finished the conversation, press SPEAKERPHONE (HEADSET) again.
MAKING CALLS WITH HEADSET
1. Select the desired dialing mode with the TONE / PULSE switch (do this only the first
time after installation).
2. Insert the HEADSET plug into the HEADSET jack on the right side of the phone as
described on the previous page.
3. Press the SPEAKERPHONE (HEADSET) button to get dial tone.
4. Adjust the VOLUME control on the right side of the phone.
5. Dial your call.
6. To hang up, press the SPEAKERPHONE (HEADSET) button again.
ANSWERING CALLS WITH SPEAKERPHONE
1. When the phone rings, press the SPEAKERPHONE (HEADSET)button, it is not
necessary to lift the HANDSET.
2. Adjust the VOLUME control on the right side of the phone.
3. When you finished the conversation, press SPEAKERPHONE (HEADSET) again.
To switch the conversation from headset to speakerphone, simply remove the HEADSET
plug from the HEADSET jack.
If you start your conversation with the handset and want to switch to headset, insert the
HEADSET plug into the jack and press the SPEAKERPHONE (HEADSET) button.
If you start your conversation with speakerphone and want to switch to headset,
just insert the HEADSET plug into the jack.
8
NOTE: When using the phone for the first time after installation, before using speaker-
phone or headset (hands-free operation), pick up the handset first.
To switch the conversation from speakerphone to private, simply lift the HANDSET or
use the HEADSET included.
If you start your conversation with the HANDSET and want to switch to speakerphone,
press the SPEAKERPHONE (HEADSET) button and replace HANDSET. Remember
to hang up by pressing the SPEAKERPHONE (HEADSET) button again.
If you start your conversation with the HEADSET and want to switch to speakerphone,
just pull off the HEADSET plug from the jack.
IB-PH3235(MS)-WM-E-122203 .p65
12/27/02, 12:43 PM
9