Lenoxx Electronics PH-3235 - Manual (Page 8)

IB-PH3235(MS)-WM-E-122203
MAKING CALLS AS A NORMAL TELEPHONE
1. Select the desired dialing mode with the TONE/PULSE switch (do this only the first
time after installation).
2. Pick up the HANDSET and listen for dial tone.
3. Dial your call.
7
REDIAL/PAUSE BUTTON
1. REDIAL FUNCTION
The last number you called can be redialed using the speakerphone, the headset or the
normal telephone. This is useful especially when the line is busy.
A. Get a new dial tone and press the REDIAL/PAUSE button.
B. To get a new dial tone, press the FLASH button or hang up the phone for 2 seconds.
Then press the REDIAL/PAUSE button. This phone will remember the last number
dialed even overnight. If you do not want anyone to know which number you dialed,
pick up the phone and press any number.
2. PAUSE FUNCTION
If you make a dial with a pause in a number, simply press REDIAL/PAUSE button for the
pause.
HOLD BUTTON
You may use this button to temporarily HOLD the line. Pressing the HOLD button will light
the HOLD indicator. When HOLD is on, the other party can not hear your conversation.
Picking up the HANDSET or press SPEAKERPHONE (HEADSET) on this phone or any
phone on the same line will stop the hold function.
INSTALLATION INSTRUCTIONS
HEADSET CONNECTION
Use only the provided headset from package for headset use. Connect the plug of the
HEADSET into the HEADSET jack on the right side of the phone.
NOTE:
Adjust the VOLUME of the SPEAKERPHONE (HEADSET) to the desired sound level
while the other party is talking. If a squealing or whistling sound is heard, reduce the
volume setting or move the microphone away from your mouth.
NOTE: This phone may be used in 3 ways:
1. Normal handset;
2. Speaker telephone;
3. Hands-free headset.
To use the HEADSET:
1. Insert the HEADSET plug into the HEADSET jack described as above.
2. Press the SPEAKERPHONE (HEADSET) button to get a dial tone.
3. Adjust the volume of the HEADSET by sliding the VOLUME control on the right side of the set.
TELEPHONE OPERATION
ANSWERING CALLS AS A NORMAL TELEPHONE
When your telephone rings
1. Lift the HANDSET and speak into the mouth piece of the HANDSET.
2. Hang up the HANDSET to release the telephone line when conversation is completed.
FLASH BUTTON
Useful for call waiting or getting a new dial tone.
IB-PH3235(MS)-WM-E-122203 .p65 3/2/04, 12:40 PM 8