Tuner operation – Kenwood KDC-5047U User Manual
Page 13
English
|
13
Tuner Operation
Station Preset Memory
Putting a station in the memory.
1
Select the frequency to put in the memory
Push the Control knob towards right or left.
2
Enter Preset Memory mode
Press the [ ] button.
3
Preset the station
Turn the Control knob to select preset number
(“P1” – “P6”), and then press the [ENTER] button
for at least 2 seconds.
Cancelling the Preset Memory mode
Press the [
] button.
Preset Tuning
Recalling the stations in the memory.
1
Enter Preset Tuning mode
Press the [ ] button.
2
Recall the station
Turn the Control knob to select recall number
(“P1” – “P6”), and then press the [ENTER].
Cancelling Preset Tuning
Press the [
] button.
This manual is related to the following products: