Kathrein UFS 702sw - Manual (Page 45)

45
DiSEqC TM (Digital Satellite Equipment Control)
Path: MENU>Main menu>Installation>DiSEqC
On the DiSEqC TM menu the control signals must be set
according to the needs of your satellite system.
22 kHz signal
{OFF} 22 kHz inactive
{High/Low} 22 kHz switches between High and
Low band
{Pos. A/B} 22 kHz switches between two
satellites
{High/Low} Activates tone burst depending on
the reception frequency
{Pos. A/B} Selects orbit position 1/3 or 2/4
{Opt. A/B} Switches between orbit position 1/2
or 3/4
{OFF}, {ON} Select {ON} if you want to operate
the receiver on a DiSEqC™ suitable
satellite reception system.
(used for cascaded switching
matrices)
{OFF}
No repeat of DiSEqC TM signal
{ 1 } The DiSEqC TM signal is repeated once
{ 2 } The DiSEqC TM signal is repeated
twice
Installation
Tone burst
DiSEqC™
DiSEqC™ repeat