Kathrein UFS 700sw - Manual (Page 28)

28
FIRST INSTALLATION: Single-cable system (Manual)
Selection “4 subscriber”
Transmission channel
Use the buttons to select a free available transmission channel. A maximum of four transmission
channels are available (1284, 1400, 1516 and 1632 MHz).
Test connection
When you have set a free transmission channel, press the buttons to switch to the “Test Connection”
selection fi eld and press the button. The receiver now tests whether a connection to the single-cable
system can be established or not. As soon as the receiver has established a connection to the single-cable
system, you will see the following display:
If no connection to the single-cable system could be established, you will receive the message:
Check your settings and if necessary call for expert help.
When the “4 subscriber” single-
cable switching matrix is being
used, it is essential that the LNB is
set to “Universal”!
Press the button to acknowledge this display.
Then press the button. You will be asked whether
you wish to save the changes. Use the buttons
to select “Yes, save changes” and confi rm by pressing
the button. Now press the
!
(green) button.
The receiver will automatically display the selection menu for the channel search. Continue by selecting
the item (Execute Channel search).