Kathrein UFS 700sw - Manual (Page 21)

21
Universal:
No further input is required, since all necessary frequency ranges are covered by a universal LNB.
Wideband:
No further input is necessary, since all frequency ranges are set by the Wideband LNB.
User-defi ned:
If you are not using a Universal or a Wideband system, you must set the frequencies here. You can fi nd the
necessary information in the documentation supplied with your system.
Use the buttons to select the frequency range to be changed (low, high or limit frequency).
Use the buttons or the digital input buttons to set the exact frequency for which your LNB was
confi gured.
When you have completed all settings for the currently selected satellite, press the button. If you have
selected more than one satellite, repeat the previous “Satellite and Position” and “LNB Type” processes for
the number of satellites you selected.
When you have completed the settings for all the satellites, the following display appears:
Use the button to select the next menu item “New registration” and press the button.
The following display appears:
FIRST INSTALLATION: Single-cable system
Use the buttons to select the type of installation you want and confi rm with the button.
For clarity, we have split further details into two sections.
Firstly we give details of “Automatic” installation, then details of “Manual” installation.