Kodak DX3700 - Manual (Page 38)

28
Chapter 4
Selecting a Date/Time Format
1 Slide the Mode selector to Setup .
2 Press the buttons to highlight the Date/Time Set menu.
3 Press the buttons to highlight DISPLAY, then press Select.
4 Press the buttons to highlight the desired date format.
5 Press Select.
Placing the Date on Pictures
Use the Date Stamp setting to imprint the date on your pictures.
1 Make sure the camera date and time are correct ( see page 27 ).
2 Slide the Mode selector to Setup .
3 Press the buttons to highlight the Date/Time Set icon, then the
buttons to select STAMP. Press Select.
4 Select ON or OFF.
5 Press Select.
The current date is printed in the bottom right corner of pictures you
take while Date Stamp is on. The setting remains until you change it.