Kenwood X-SE9 - Manual (Page 55)

R-SE9T/DP-SE9/X-SE9 (En)
55
Preparation section
Basic
section
Application section
Knowledge section
Specifications
Receiver (R-SE9T)
[Amplifier section]
Rated power output
(DIN) 1 kHz at 6
Ω
, 0.7 % T.H.D. ........... 40 W + 40 W
Total harmonic distortion
............................ 0.06% (40 Hz ~ 20 kHz, 20 W, 6
Ω
)
Frequency response ........ 20 Hz ~ 40 kHz, +0 dB, –3 dB
Input sensitivity / Impedance
.......................................................... 200 mV / 47 k
Ω
Output level / Impedance
SUPER WOOFER PRE OUT ................ 2.0 V / 1.5 k
Ω
TAPE REC ........................................... 200 mV / 1 k
Ω
Signal to noise ratio
............................................................. 92 dB (IHF’66)
Total control
BASS ........................................... ±10 dB (at 150 Hz)
TREBLE ....................................... ±10 dB (at 10 kHz)
[FM Tuner section]
Tuning frequency range ............... 87.5 MHz ~ 108 MHz
Usable sensitivity (DIN)
MONO
.. 1.2 µV (75
Ω
) / 13.2 dBf (40 kHz DEV., S/N 26 dB)
Signal to noise ratio
(DIN weighted at 1 kHz, 65.2 dBf input)
MONO .............................................................. 65 dB
STEREO ............................................................ 58 dB
Selectivity (DIN ±300 kHz) .................................... 64 dB
Stereo separation (DIN at 1 kHz) ........................ 40 dB
[AM Tuner section]
Tuning frequency range ................ 531 kHz ~ 1,602 kHz
Usable sensitivity (30% mod., S/N 20 dB)
.................................................... 12 µV / (500 µV/m)
Signal to noise ratio (at 30% mod., 1 mV input)
........................................................................... 48 dB
Output level / Impedance (30% mod., 1 mV input)
............................................................... 0.18 V / 1 k
Ω
General
Power consumption .............................................. 80 W
Dimensions .................................................. W: 213 mm
H: 97 mm
D: 282 mm
Weight (net) .......................................................... 3.8 kg
Notes Notes
1.KENWOOD follows a policy of continuous advancements in development. For this reason specifications may
be changed without notice.
2.Sufficient performance may not be possible at very low temperatures (0°C or less).
CD player (DP-SE9)
Laser ............................................. Semiconductor laser
Playing rotation .................... 200 rpm ~ 500 rpm (CLV)
Frequency response ................. 4 Hz ~ 20 kHz, ±1.0 dB
Signal to noise ratio ......................... More than 100 dB
Dynamic range .................................... More than 95 dB
Total harmonic distortion
.................................... Less than 0.004 % (at 1 kHz)
Channel separation .......... More than 92 dB (at 1 kHz)
Wow & Flutter ............................. Unmeasurable Limit
Output level / Impedance
Fixed ........................................................ 1.2 V / 1 k
Ω
Digital output
Optical ...................................... –15 dBm ~ –21 dBm
(wave length 660 nm)
General
Power consumption .............................................. 10 W
Dimensions .................................................. W: 213 mm
H: 97 mm
D: 249 mm
Weight (net) .......................................................... 2.2 kg
Cassette deck (X-SE9)
Track ...................................... 4-track, 2-channel stereo
Recording system ................................ AC bias system
(Frequency: 105 kHz)
Heads
Playback / recording head ...................................... 1
Erasing head ............................................................ 1
Motors ........................................................................... 1
Wow and flutter ................................. 0.1 % (W.R.M.S.)
Fast winding time ...................... Approx. 110 seconds
(C-60 tape)
Frequency response
TYPE I tape .................... 40 Hz to 18,000 Hz, ±3 dB
TYPE II tape ................... 40 Hz to 19,000 Hz, ±3 dB
Signal to noise ratio
Dolby B NR ON ............................ 67 dB (CrO 2 tape)
Dolby C NR ON ............................ 73 dB (CrO 2 tape)
Dolby NR OFF .............................. 60 dB (CrO 2 tape)
Input sensitivity / Impedance ............ 77.5 mV / 47 k
Ω
Output level / Impedance ................... 775 mV / 10 k
Ω
General
Power consumption .............................................. 14 W
Dimensions .................................................. W: 213 mm
H: 77 mm
D: 249 mm
Weight (net) .......................................................... 2.3 kg