Kenwood X-SE9 - Manual (Page 42)

R-SE9T/DP-SE9/X-SE9 (En)
42
Preparation section
Basic section
Application section
Knowledge sections
R.D.S.
Select the desired information.
Each press switches the modes as follows.
1TA..........................Traffic Announcement
2NEWS................... News
3INFO...................... Information
4Display not lit....... EON cancelled
÷ Please execute automatic presetting when TA, NEWS,
and INFO can not be selected.
1
÷ When one of the stations of the network of the station
received in 2 starts broadcasting the program contents
selected in 1, that station will be received automatically.
At this time, the input selection becomes TUNER, and
CD or MD playback will pause.
However, external equipment (AUX) will remain as it is.
When reception of the desired EON programs is com-
plete, the input selector returns to the previous input
source.
÷ When the power is OFF and during recording, the EON
function does not operate.
÷ When the transmission of the selected program contents
ends in case of automatic reception with the EON func-
tion, return will be made to the status directly before
operation of the EON function.
Set the reception band to FM.
TA/
NEWS/INFO.
Receive an RDS station.
2
When “INFO” is selected
÷ When “TA” has been selected in step 1, always select
a station for which the “TP” indication is lit.
÷ When “EON” does not light although an RDS station is
received, that station is not transmitting EON data.
Please select a different station.
“RDS” and “EON” are lit
Wait for the desired information.
3
CD or tape playback also may be started.
As long as the power is ON, standby condition will
exist.
To be able to listen to the desired information at any time
(EON reservation)
Select a station where “RDS”
and “EON” are lit.
By using the EON function, which manages the information of other stations, listening to desired information like
traffic information or news etc. can be reserved even when it is not being transmitted at the present. When
listening to a station with the “EON” display lit and another station of the same network starts to broadcast an
information program for which a reservation has been made, then that station will be selected automatically.
When the desired information program ends, return is made to the original program.
For reception of RDS stations, the RDS auto presetting function must be used to preset the stations.
¶
¢
P.CALL
4
B B C 1 F M
TUNED ST. AUTO RDS EON TP
INFO
This lights for stations where TP
(Traffic Program) can be received.
B B C 2 F M
TUNED ST. AUTO RDS TP
INFO
EON
TP (Traffic Program) Indication
When the “TP” indication is lit, this indicates that this
station or a station in the same network is transmitting
traffic information.
When “TP” is displayed for the station presently being
received, the traffic information of this station can be
heard even without EON reservation.