Konica Minolta DiMAGE Viewer - Manual (Page 73)

73
Click the OK button to begin processing. The save-in dialog box will open.
Select the location to save the
images on the folder tree (1).
Specify the file type of the
images (2). If saved in the TIFF
format, the bit length must be
selected (3): 24 bit or 48 bit.
Once saved as 24 bit, images
cannot be resaved as a 48-bit
file. If saved in the JPEG for-
mat, the compression rate
should also be set (4). The
higher the compression rate the
smaller the file size and the
lower the image quality.
Click the change-file-name check box (5) to rename the image files. Enter the file name up to ten
characters and enter the first serial number up to five digits.
Click the OK button to begin batch processing.
1
2
3
4
5