KORG Personal Multi-Effect Processor PX5D - Manual (Page 29)

29
AMP: Amp Modeling
BTQ CLN
–OCTFUZZ (15 types) are guitar amps, and
VALVE1 –UKMAJOR (10 types) are bass amps.
GSYNTH1–GSYNTH3 are guitar synths, and BSYNTH1–
BSYNTH3 are bass synths. The value display will indi-
cate “Gt” for approximately one second if you’ve selected
a guitar model, or “bA” if you’ve selected a bass model.
Mid
range*
▲/▼: Type selection
* Operation will be different if VALVE1–JAZZ (bass amps),
GSYNTH1–3, or BSYNTH1–3 is selected as the type.
Amount of distortion* High range* Low range*
Volume*
On, Off
The VOLUME dial can be used to adjust the volume even
when the amp modeling effect is “OFF.”
CAB: Cabinet Modeling
This simulates the acoustical characteristics of the amp’s
cabinet. This is especially effective when you are not using
an amp (e.g., when using headphones, or when connect-
ing to a mixer, hard-disk recorder, or other audio device).
1X8TWD
–4X12VIN (11 types) are guitar amp cabinets, and
LA 4X10 –COMBI (12 types) are bass amp cabinets. The
value display will indicate “Gt” for approximately one sec-
ond if you’ve selected a guitar amp cabinet, or “bA” if you’ve
selected a bass amp cabinet.
On, Off
Presence ▲/▼: Type selection
You can also use a guitar amp with a bass cabinet, or a
bass amp with a guitar cabinet.