Kathrein UFD 580 - Manual (Page 78)

Installation Menu
78
Transponder Selection
The following settings are now possible (select items with

):
• Select desired satellite with

or

.
• Select transponder frequency with

or

.
• Select polarisation with

or

.
• Select symbol rate with number pad buttons.
• Select scan mode for FTA only or FTA and scrambled
programmes with

or

.
• Delete transponder (refer to note on page 79).
The bar chart shows the relative signal strength, and is not an
indicator of the quality of the reception system.
Start the scan by pressing

from the “Scan” entry.
Press

to exit this menu and skip to the programme highlighted by
the cursor bar.