Kathrein UFD 580 - Manual (Page 63)

Password
63
You can make the following settings here:
Age Limit: This setting is only effective if the corresponding lock-out
signals are transmitted.
Lock Channel Editing: Yes/No. With this option, you can lock or unlock
the editing function for programme lists.
Lock Installation: Yes/No. With this option, you can lock or grant
access to the installation menu.
New Password: Here you can enter your (new) password using the
number buttons.
Verify Password: Here you enter your (new) password again, using
the number buttons, to confirm it.
Personal: Here you enter the receiver identification which is displayed
when the receiver is turned on. This is useful for identification in case
of theft. Refer to the “Operating Instructions” section for information on
how to use the number pad buttons on the remote control for
alphanumeric input. The factory default setting is “Twin-DVR receiver”.
This completes all the settings to secure and identify your satellite
receiver.
If you have forgotten your password, you must contact your dealer,
who will be able to unlock your receiver for you.