KORG Kaptivator KTV1 - Manual (Page 11)

9
Owner’
s Manual
3. Connection diagram
Basic connections
DC12V MAIN OUTPUT
INPUT2
INPUT1
AUDIO TRIG
INPUT
DV I/O
AC
PHONES
MIDI
IN/OUT
MIDI
OUT/IN
MIDI
sequencer
IEEE1394
DV camera,
DV recorder etc.
AC ADAPTER Headphones
DJ Set
CAMCORDER
DVD PLAYER
TV MONITOR
PROJECTOR
Selecting the DV connector input/output setting
1 Hold down the EDIT key and press the INPUT key.
2 Use the VALUE knob to select either “in” or “out” in the VALUE display.
3 Press the YES/WRITE key twice. If you decide to cancel the setting, press the NO/ESC key
twice.
About video signal formats
The kaptivator supports both the NTSC and PAL video signal formats. NTSC is the format
used in the United States and Japan, while PAL is the format used in the United Kingdom
and Europe.
Set the NTSC/PAL switch according to the video signal format of the equipment you’re us-
ing. The kaptivator will not operate correctly if the video signal format is incorrect. Also, the
kaptivator will not operate correctly with non-interlaced video signals.
Playing copy-protected video from a commercial DVD
Copy-protected DVD video cannot be used as a video source. If you connect this type of
signal to the kaptivator’s INPUT jack, the image will not appear. In addition, a warning of
“PROTECTED” may appear in some cases, if you’ve selected ALL as the setting for MONI-
TOR 2.