Repeated playback, Preparation – Kenwood DPF-2010 User Manual
Page 16
16
DPF-3010/2010/1010 (En)
Repeated playback
To repeat only the programmed tracks
: Keys and control used in the operations described on this page.
™
Preparation
To cancel repeated playback
Press the REPEAT key again.
Lights up.
1
Press so that the "PGM" indicator lights.
2
Select the desired track No.
Press the numeric keys as shown below...
To enter track No. 25:
005
5
Switch REPEAT ON.
6
Start playback.
4
Repeat steps
2 and 3 above.
Go to step
3 within 5 seconds.
3
Set the entry.
÷ All of the programmed tracks will be repeated.
÷ In case only one track is programmed, only that track will be repeated.
÷ Up to 20 tracks can be programmed. When “
FULL
” is displayed, no
more tracks can be programmed.
Lights up.
Goes off.
Do this operation in the stop mode.
1
¡
4
7
6
¢
P.MODE
0
+
10
7
8
9
4
5
6
1
2
3
P.MODE
REPEAT
6
PLAY/PAUSE
REPEAT
TRACK
NO.
PGM
0 1
TRACK
NO.
PGM
REPEAT
0 1
TRACK
NO.
PGM
REPEAT
0 1
The figure shows an example for the DPF-3010
÷ Load a disc in the CD player.
@