Kenwood DPF-2010 - Manual (Page 12)

12
DPF-3010/2010/1010 (En)
Normal play (TRACK mode)
2
Load a disc.
3
Start playback.
1
Open the tray.
Use the following procedure to play a CD in the original order
of tracks from track No. 1.
: Keys and control used in the operations described on this page.
3
Close the tray.
Playing tracks in order from track No. 1
÷ Playback starts when a disc has been loaded.
To pause playback
2
Place a disc.
Disc tray
Press the ON/STANDBY switch to ON.
Label side
÷ After a few seconds, play starts from the track No. 1.
Elapsed time of track being played
Track NO. being played
1
Lights up.
÷ Each press pauses and plays the CD alternately.
To stop playback
÷ Do not touch the played side of disc.
÷ Loading two discs together will cause malfunctioning.
÷ Place the disc properly along the groove on the tray. (If the disc is not
placed horizontally, malfunction will result.)
÷ A single CD (8 cm disc) can also be played.
÷ Ordinary CD single (8 cm) disc adapters sold in audio stores cannot be
used with this unit.
Lights up.
The track Nos. recorded on the CD are displayed.
1 ¡
4
7 6
¢
ON/STANDBY
0
1 ¡
4
7 6
¢
0
6
PLAY/PAUSE
6
PLAY/PAUSE TRACK
7
STOP
TRACK
TRACK
NO.
SINGLE TIME
6
1
7
2
8
3
9
4
10
5
0
:
1
0 0 0
TRACK
TRACK
NO.
SINGLE TIME
6
1
7
2
8
3
9
4
10
5
0
:
1
0 0 5
The figure shows an example for the DPF-3010