Simm to be used, Installing and removing simms – Kyocera FS1750 User Manual
Page 44
1.7. Memory Expansion Installation
1-25
SIMM to be used
See your Kyocera dealer for purchasing information of the SIMMs that are best suited for use with this
printer.
Either 4 MB, 8 MB, 16 MB or 32 MB SIMMs can be used for memory expansion.
Installing and Removing SIMMs
Installing SIMMs
Insert the SIMM into the socket as shown right.
1.
Insert the connector end of the SIMM into the
socket.
2.
Carefully push the board upright until it snaps into
place. Make sure that the catches at the ends of the
socket fit into the holes at the ends of the SIMM
board.
SIMM
Catch
Socket
Catch
This manual is related to the following products: