beautypg.com

Network settings, Data settings – Kyocera KX12 User Manual

Page 52

background image

44

Customizing Your Phone

Limit All

limits all incoming and

outgoing calls.

Erasing all contacts

You can erase all entries in your Contacts
directory.

1.

Select

Menu

Settings

Security

.

2.

Enter your four-digit lock code.

3.

Select

Erase Contacts

.

4.

Select

Yes

to erase all contacts. A message

appears: “Erase ALL Contacts?”

5.

Select

Yes

again to erase all contacts.

Network settings

Switching between phone lines

Your phone can have two service accounts, or
phone lines, associated with it. Each phone line
has its own phone number. You must first
establish a second phone line with your service
provider. Once established, a second phone
number becomes available in the menu
for selection.

Note:

Not available on all phones, check with

your service provider.
When you are using one line, you cannot receive
calls from the other. It would be as if the phone
were “off” for that number. Your voicemail,
however, will still take messages. All contacts and
settings are shared for both lines.

1.

Select

Menu

Settings

Network

Set Phone Line

.

2.

Select one of the two lines and press

.

Data Settings

Setting Com port speed

The Com Speed sets the data rate at which your
phone connects to a laptop or personal computer
or at which it sends and receives over-the-air
text messages.

Note:

Not available on all phones, check with

your service provider.

1.

Select

Menu

Settings

Accessories

Com Port Speed

.

2.

Select the speed:

19.2 kbps

,

115.2 kbps

(default),

230.4 kbps,

or

Other

.

Note:

There may be a higher charge for making

calls using high-speed data in areas where 1X
service is available. Check with your service
provider for details.

Setting the phone to receive data
or faxes

Your phone may be able to receive certain data or
faxes, depending on the system sending the
information. You cannot receive voice or PTT
calls while the phone is in data/fax mode. To
receive data or faxes, you must connect the phone
to a laptop or PC and switch the phone from voice
mode to data/fax mode.

82-N8191-1EN.book Page 44 Tuesday, January 17, 2006 2:56 PM