Kenwood DPX-3070B EN - Manual (Page 17)

English | 17
Station Preset Memory
Putting the station in the memory.
1
Select the band
Press the [FM+] or [AM–] button.
2
Select the frequency to put in the memory
Press the [
4] or [¢] button.
3
Put the frequency in the memory
Press the desired [1] — [6] button for at least
2 seconds.
The preset number display blinks 1 time.
On each band, 1 station can be put in the
memory on each [1] — [6] button.
Auto Memory Entry
Putting a station with good reception in the
memory automatically.
1 Select the band for Auto Memory Entry
Press the [FM+] or [AM–] button.
2 Enter Function mode
Press the [FNC] button for at least 1 second.
"Function" is displayed.
3
Select the Auto Memory Entry mode
Press the [FM+] or [AM–] button.
Select the "A-Memory" display.
4
Open Auto Memory Entry
Press the [
4] or [¢] button for at least 2
seconds.
When 6 stations that can be received are put in
the memory Auto Memory Entry closes.
Preset Tuning
Calling up the stations in the memory.
1
Select the band
Press the [FM+] or [AM–] button.
2
Call up the station
Press the desired [1] — [6] button.
Frequency Step Setting
Changing the tuning frequency step.
The original setting is FM band 50 kHz, and AM
band 9 kHz.
1
Turn the power OFF
Press the [SRC] button for at least 1 second.
2
Switch the frequency step
While pressing the [1] and [5] button, press
the [SRC] button.
The frequency step changes to FM band 200 kHz,
and AM band 10 kHz.
• When the same operation is repeated, it returns to the
original setting.
• When the frequency step is switched, the frequencies
in the memory are deleted.