Kenwood DPX-3070B EN - Manual (Page 11)

English | 11
SRS WOW Control
Adjusts each function of SRS WOW individually.
1
Enter the WOW Control mode
Press the [WOW] button for at least 1 second.
"WOW CTRL" is displayed.
2 Select the WOW item for adjustment
Press the [FM+] or [AM–] button.
Each time the button is pressed, the items that
can be adjusted switch as shown below.
3
Adjust the WOW item
Press the [
4] or [¢] button.
Adjustment Item Adjustment Item Display Display Display Range Range
SRS FOCUS setting SRS FOCUS setting "FOCUS" 0(Off)/1(Low)/2(High) 0(Off)/1(Low)/2(High)
SRS TruBass setting SRS TruBass setting "TB" Off/On
SRS 3D setting SRS 3D setting "SRS" Off/On
4
Exit the WOW Control mode
Press the [WOW] button.
• TruBass: Assisting the playback for the super bass
sound.
• FOCUS: Adjusts the sound image by changing the
vertical position of the speakers virtually and
increases or decreases the soundscape.
• SRS 3D: Making a natural 3D sound field.
• SRS 3D cannot be set in tuner source.
Equalizer Control
You can recall the best sound setting preset for
different types of the music.
1 Enter the Equalizer Control mode
Press the [EQ] button.
"EQ EASY" or "EQ PRO" is displayed.
2 Select the Equalizer type
Press the [EQ] button.
Each time the button is pressed, the Equalizer
type switches as shown below:
Equalizer type Equalizer type Equalizer type Display Display Display
Rock "Rock"
Dance "Dance"
Jazz "Jazz"
Pops Pops "Pops" "Pops"
Heavy Heavy "Heavy" "Heavy"
Adjustment of Equalizer type at
EASY
Adjusting the effect of an Equalizer type selected
in 'Equalizer Control' when 'Equalizer mode' is
"EASY".
1 Refer to 'Equalizer Control' (page 11) to
select the Equalizer type.
2 Adjust the effect
Press the [FM+] or [AM–] button.
Each time the button is pressed, the effects of
Equalizer switch as shown below:
Setting of effect Setting of effect Display Display Display
High High "Hi"
Middle "Mid"
Low "Lo"
3
Exit the Equalizer Control mode
Press the [EQ] button for at least 1 second.
When operation stops for 10 seconds, the
Equalizer type at that time is registered and the
Equalizer Control mode automatically closes.
Soft "Soft"
Sharp Sharp "Sharp" "Sharp"
Light Light "Light" "Light"
Natural "Natural"
• "User" display: The values set on the 'Adjustment of
Equalizer type at PRO' (page 12).
• A selected Equalizer type can be adjusted.
Adjustment items depend on the setting of 'Equalizer
mode' (page 24). Refer to 'Adjustment of Equalizer
type at EASY' (page 11) or 'Adjustment of Equalizer
type at PRO' (page 12) for details of adjustment.
3
Exit the Equalizer Control mode
Press the [EQ] button for at least 1 second.
When operation stops for 10 seconds, the
Equalizer type at that time is registered and the
Equalizer Control mode automatically closes.