Konica Minolta Dimage Scan Elite F-2900 - Manual (Page 13)

11
Terminating the SCSI chain
helps to suppress electronic
noise in the SCSI
chain.
Not terminating the SCSI
chain
can cause slo
wdowns, data
errors, crashes, and other
unpredictable errors
.
5. Plug the power cord into the scanner’s AC
socket, then plug it into a grounded outlet.
4. Turn the terminator power switch
(switch 4) to ON.
• An external terminator is not necessary with
this scanner.
If the Dimâge Scan Elite is the last or
only device in your SCSI chain…
CONNECTING THE HARDWARE
This decive is to be
used with a po
wer
source within the
voltage as specified on
the back of unit.