KTM 950 SUPERMOTO R - Manual (Page 58)

Replacing the brake light and taillight bulbs
Remove the seat. Remove the screws from the baggage carrier [1] and the upper rear [2]
and take off both parts.
BULB FOR BRAKE LIGHT:
Turn the bulb socket [3] approx. 30° in a counterclockwise direction and pull it out of the
taillight housing. Slightly press in the bulb, turn approx. 30° in a counterclockwise direc-
tion and remove it from the socket.
Proceed in the reverse order to mount a new bulb.
BULBS FOR THE TAILLIGHT:
Remove the bulb socket [4] from the housing and pull the bulb out of the socket. Insert a
new bulb and press the bulb socket all the way into the taillight housing.
Mount the upper rear and insert the screws. Mount the baggage carrier and tighten the screws
to 25 Nm. Tighten the screws on the upper rear to 5 Nm. Mount the seat.
MAINTENANCE WORK ON CHASSIS AND ENGINE
»
57
1
2
3
4
4