Maintenance work on chassis and engine – KTM 950 SUPERMOTO R User Manual
Page 45
MAINTENANCE WORK ON CHASSIS AND ENGINE
»
44
Checking the front brake pads
The brake pads can be seen from the rear. The linings must be at least 1 mm (0.04 in) thick.
At their most worn point brake pad linings should not be thinner than 1 mm,
otherwise they could lead to brake failure. For your own safety don’t put off having your brake
pads changed.
If the brake pads are replaced too late when the lining is partly or completely worn off, the
steel parts on the brake pads will grind against the brake disks. This significantly decreases
the braking effect and destroys the brake disks.
min.
1 mm
See also other documents in the category KTM Motorcycles:
- 125 SX (48 pages)
- EXC-F 400 XC-W (68 pages)
- 400 EXC RACING (66 pages)
- 530 XCR-W USA (125 pages)
- Supermoto 40LC4-E (46 pages)
- 380SX (153 pages)
- 1190 RC8 JP (234 pages)
- 640 LC4 (50 pages)
- 990 SUPER DUKE R (92 pages)
- 990 SUPER DUKE (90 pages)
- 50 SX PRO JUNIOR LC (35 pages)
- 125 SX (46 pages)
- EXC 200 EXC (70 pages)
- 690 ENDURO AUS/UK (179 pages)
- 400 (46 pages)
- XC 105 SX (42 pages)
- SUPERENDURO R 950 (40 pages)
- 990 ADVENTURE (102 pages)
- 200 (67 pages)
- 560 SMR 2006 (28 pages)
- 50 SX (42 pages)
- 85 SX (40 pages)
- 250 SX-F (70 pages)
- Super Duke 990s (52 pages)
- 525 SX (62 pages)
- 3CF6001G6EN (24 pages)
- 950 R (86 pages)
- Supermoto 640LC4 (46 pages)
- ENDURO 640 LC4 (60 pages)
- 85SX (42 pages)
- ENDURO SUPERMOTO 640 LC4 (60 pages)
- Supermoto 690 (165 pages)
- 950 SUPERMOTO (90 pages)
- 950 (86 pages)
- 300SX (56 pages)
- Supermoto 640 LC4 (40 pages)
- 3CF8403H0EN (28 pages)
- 50 SX JUNIOR (42 pages)
- 450 SMR (91 pages)
- 85/105 SX (42 pages)
- 3CF6001F5EN (20 pages)
- 300 XC 2008 (74 pages)
- XCF-W 250 EXC-F EN (63 pages)
- EXC 250 XC DE (69 pages)