Kenwood TK-8150 - Manual (Page 19)

15
O
PTIONAL
F
EATURES
Short Messages: Received short messages (maximum of 48 characters) are
displayed the same as Status messages {page 16}, however only 4 short
messages can be stored in the stack memory. “M” (Message) and the message
number appear with the message.
GPS Report: If an external GPS receiver (NMEA-0183 format) is installed on
the transceiver and the Send GPS function is programmed onto a key by your
dealer, you can press the programmed key to send your location data.
S
ELCALL
(S
ELECTIVE
C
ALLING
)
A Selcall is a voice call to a particular station or to a group of stations.
■ Transmitting
1 Select your desired zone and channel/group ID.
2 Press the key programmed as Message Mode to enter Selcall Mode.
3 Rotate the Selector to select the ID of the station you want to call.
• You can also enter digits by using the DTMF keypad if Manual Dial is enabled.
(Press the PF1 key or the key to erase an incorrect digit.)
4 Press the PTT switch and begin your conversation.
■ Receiving
An alert tone will sound, the transceiver will automatically enter Selcall Mode,
and the calling station’s ID will appear when a Selcall is received.
To respond to the call, press the PTT switch and speak into the microphone.
■ Reviewing Caller IDs in the Stack Memory
The mail icon ( ) will flash when a Selcall call is received and stacked.
1 Press and hold the key programmed as Message Mode for more than
1 second to enter Stack Mode.
• The last received Caller ID is displayed with the Caller ID number. “I” (ID)
appears with the number.
2 Rotate the Selector to select the ID you want to view (if more than one ID
is stored in the stack memory).
3 To erase the ID, press and hold the PF1 key or the key for more than
1 second.